PRODUCTS

82.5 KVA

SPECIFICATION FOR STANDARD AMF PANEL 82.5 KVA

Cubicle type, base mounting control panel with hinged doors, un-drilled bottom gland plate, AL. Bus Bar and accommodating the following:

SWITCH GEARS:

• » 130A, 4 Pole Contactor for ALTERNATOR with Thermal O/L relay
• » 130A, 4 Pole Contactor for MAINS (OPTIONAL)

BACK-UP PROTECTION:

• HRC fuse for short circuit protection

MICROPROCESSOR BASED AMF MODULE INCORPORATING:

Functions:

• » Supply Failure Timer
• » Restoration Timer
• » 3 Impulse automatic engine Start / Stop logic
• » Mains / Generator Voltage & Frequency Sensing.

Multifunction Meter & PCC 0301 with Scrolling Readings for

• » Water Temperature/ Lube Oil Pressure
• » Voltage / Ampere/ Frequency / kW / kVA
• » Running-hour counter

Fault Indication (LED Type)

• » Over / Under Speed
• » Fails To Start
• » Low Oil pressure
• » Battery Charger Failure
• » High Engine Temperature

Electronic kWH meter (Counter Display)

Current Transformers

Relay:
Earth Fault Relay (Electronic type)

Indications (LED):

• DG ON, Load on DG
• Mains ON, Load on Mains, Battery Charger ON

Push Buttons (AMF MODULE BY PASS MODE)

• Engine START / STOP ( Provided on Engine Controller )
• Generator Contactor CLOSE / TRIP
• Mains Contactor CLOSE / TRIP (If provided)
• Fault ACCEPT / RESET

BATTERY CHARGER:

• SMPS Based Unit with inbuilt Auto/Manual & Float/Boost Facility
• DC Voltmeter & Ammeter (Separate)

PLHO / 0712/RKS/ASN